Online Babe Tutorial by Sher
This tutorial was written using PSPX2 And Animation Shop, Providing you have a basic knowledge of
PSP and animation shop it shouldn't be too difficult to do.
This tutorial is copyrighted by Young at Heart Designs. Any similarities is pure coincidental.
Supplies:
I'm using the beautiful work of Keith Garvey. If you wish to use his tubes you must
purchase his tubes and obtain licences to do so. You can find it Here
The kit I'm using is a PTU kit called Dot. Com made by Vassia
Please visit her site Here
Check out this awesome store for more wonderful kits Here
Babe's Template 30 Here
Mask wsl mask 84 Here
Word art in my supplies Here
Plug ins -dsb flux can be found Here
OK Lets go!
Open supplies and minimize everything but the template
open template copy and close the original, working off copy delete the
copywriters information layer
go to image and re size canvas to 625x625
select layer one in the layer pallet go to selections
select all~float~defloat~ add paper of choice I used 16,
selections ~ Modify~smooth by 10~invert~ Hit delete on keyboard
selections~ select none~ rename this square layer. Re size to 110 %.
Delete the original square template layer.
select layer 2 in the pallet ~go to selections
select all ~ float~ defloat~ flood fill using color #63a1a5 or your own choice
selections~select none
rename this rectangle layer
select layer 3 in you pallet
Selections-select all ~float~defloat~ flood fill using color #294344
or your own choice ~selections~select none.
rename this strip layer
Select layer 4 on your pallet
select all~float~defloat~ open paper 15 from kit , copy and paste as new layer
go to selections ~Modify ~ smooth by 10~invert~hit delete on keyboard,
selections~select none~rename this layer circle layer ~delete the circle template or # 4 layer in you pallet.
Select layer 5 on your pallet
selections~select all~float~defloat~ flood fill using color #294344
selections~ select none.
Frames
select layer 5 again
Using magic wand , click on inside of left square and go to selections
modify ~contract by 5~ invert~ flood fill using color #63a1a5
selections~select none.
select layer 5 again
Using magic wand , click on inside of right square and go to selections
modify ~contract by 5~ invert~ flood fill using color #63a1a5
selections~select none.
Open bow of choice, copy and paste as a new layer ~re size to 20%
duplicate this layer 3 more times.
place where desired or see my tag for placement. merge all the bows on one layer.
Add all drop shadows of choice to these elements.
Tube layers
open tube up in psp copy and close original
select layer 5 in pallet
using magic want click inside left frame , paste tube as new layer
position tube so just the face is inside frame and re size to 70% and move in place.
then go to selections~ invert~ hit delete on keyboard~selections~select none. Name this layer left tube layer.
Repeat steps for tube on frame on right side. Mirror tube if you want too
by going to image mirror. name this layer right tube layer
Open main tube of choice~ copy and close original.
click on circle layer in pallet
using magic wand click on inside edge of circle, use a high tolerance of 80 ,
once you see the ants paste as a new layer your main tube. go to selections
invert~ selections ~ select none. Name this layer your main tube layer.
Open gem 4 and position it where you want, see my tag for placement. Name this gem layer
Open flower element of choice , copy and paste as a new layer
re size it 50 % and then 80 % then duplicate it 6 times. position the layers and then
merge all 6 and place this layer right above the circle layer but below the main tube layer. Name this flower layer.
Open bow of choice~copy and paste as a new layer~ re size to 20 percent~
Duplicate it 3 more times and then place where desired . See my tag for placement. merge
all bows on one layer. Name this bow layer
l
Add word art of choice or make your own.
Font is a pay to use font so I cant supply it , but I did provide extra word art.
Mask Layer
select bottom background layer , go to layers ~add a new raster layer~
Add paper of choice , I used same paper as circle layer. select background layer go to
layers, new mask layer~ from image~ select wsl mask 84 ~ source luminance checked in circle
click OK~ Then merge group and re size mask to 120%, and move it to your liking.
Name this the mask layer
If you don't want tag animated u can delete layer 6 , add copy writes ,
name, and merge all layers re size to 500x500 and your done.
Animations
go to layer six and duplicate it. name this layer 7-1
on original layer 6 -use you magic wand and click inside every other little square starting at top
line , and continuing on to the bottom line.
go to new add a new image ~flood fill this canvas with whatever color you want, I used
color #294344. then copy~add as a new layer~ then go to invert~ selections ~select none.
name this layer 6-2
Go to layer 7-1 and repeat last steps and select each little square you didn't select last time,
Make a new canvas , flood fill will a different color~ copy and paste as a new layer~
invert~ selections~ select none- name this layer 7-2
Select gem 4 layer and go to effects~ plug ins~ dsb flux ~ bright noise
40% mix checked click OK
lets animate
close off layer 7-1 and 7-2
go to edit ~copy special -copy merge~ and take to animation shop and paste as new layer
back to psp
undo bright noise
redo noise 50%
close off 6 and 6-2
and reopen 7-1-7-2
edit ~ copy special~ copy merged~ take to AS and paste after current frame
back to psp
undo bright noise
redo noise 60%
close off 7-1 and 7-2 layer
and reopen 6 and 6-2 layer
edit~ copy special~ copy merged~ take to As and paste after current frame
You should have 3 frames . View Animation if you like what you see you can save as a gif and your done!
Thanks for trying my tutorial , if you have any problems feel free to email me
or use the chat box! Thanks !
Sher
This tutorial was written using PSPX2 And Animation Shop, Providing you have a basic knowledge of
PSP and animation shop it shouldn't be too difficult to do.
This tutorial is copyrighted by Young at Heart Designs. Any similarities is pure coincidental.
Supplies:
I'm using the beautiful work of Keith Garvey. If you wish to use his tubes you must
purchase his tubes and obtain licences to do so. You can find it Here
The kit I'm using is a PTU kit called Dot. Com made by Vassia
Please visit her site Here
Check out this awesome store for more wonderful kits Here
Babe's Template 30 Here
Mask wsl mask 84 Here
Word art in my supplies Here
Plug ins -dsb flux can be found Here
OK Lets go!
Open supplies and minimize everything but the template
open template copy and close the original, working off copy delete the
copywriters information layer
go to image and re size canvas to 625x625
select layer one in the layer pallet go to selections
select all~float~defloat~ add paper of choice I used 16,
selections ~ Modify~smooth by 10~invert~ Hit delete on keyboard
selections~ select none~ rename this square layer. Re size to 110 %.
Delete the original square template layer.
select layer 2 in the pallet ~go to selections
select all ~ float~ defloat~ flood fill using color #63a1a5 or your own choice
selections~select none
rename this rectangle layer
select layer 3 in you pallet
Selections-select all ~float~defloat~ flood fill using color #294344
or your own choice ~selections~select none.
rename this strip layer
Select layer 4 on your pallet
select all~float~defloat~ open paper 15 from kit , copy and paste as new layer
go to selections ~Modify ~ smooth by 10~invert~hit delete on keyboard,
selections~select none~rename this layer circle layer ~delete the circle template or # 4 layer in you pallet.
Select layer 5 on your pallet
selections~select all~float~defloat~ flood fill using color #294344
selections~ select none.
Frames
select layer 5 again
Using magic wand , click on inside of left square and go to selections
modify ~contract by 5~ invert~ flood fill using color #63a1a5
selections~select none.
select layer 5 again
Using magic wand , click on inside of right square and go to selections
modify ~contract by 5~ invert~ flood fill using color #63a1a5
selections~select none.
Open bow of choice, copy and paste as a new layer ~re size to 20%
duplicate this layer 3 more times.
place where desired or see my tag for placement. merge all the bows on one layer.
Add all drop shadows of choice to these elements.
Tube layers
open tube up in psp copy and close original
select layer 5 in pallet
using magic want click inside left frame , paste tube as new layer
position tube so just the face is inside frame and re size to 70% and move in place.
then go to selections~ invert~ hit delete on keyboard~selections~select none. Name this layer left tube layer.
Repeat steps for tube on frame on right side. Mirror tube if you want too
by going to image mirror. name this layer right tube layer
Open main tube of choice~ copy and close original.
click on circle layer in pallet
using magic wand click on inside edge of circle, use a high tolerance of 80 ,
once you see the ants paste as a new layer your main tube. go to selections
invert~ selections ~ select none. Name this layer your main tube layer.
Open gem 4 and position it where you want, see my tag for placement. Name this gem layer
Open flower element of choice , copy and paste as a new layer
re size it 50 % and then 80 % then duplicate it 6 times. position the layers and then
merge all 6 and place this layer right above the circle layer but below the main tube layer. Name this flower layer.
Open bow of choice~copy and paste as a new layer~ re size to 20 percent~
Duplicate it 3 more times and then place where desired . See my tag for placement. merge
all bows on one layer. Name this bow layer
l
Add word art of choice or make your own.
Font is a pay to use font so I cant supply it , but I did provide extra word art.
Mask Layer
select bottom background layer , go to layers ~add a new raster layer~
Add paper of choice , I used same paper as circle layer. select background layer go to
layers, new mask layer~ from image~ select wsl mask 84 ~ source luminance checked in circle
click OK~ Then merge group and re size mask to 120%, and move it to your liking.
Name this the mask layer
If you don't want tag animated u can delete layer 6 , add copy writes ,
name, and merge all layers re size to 500x500 and your done.
Animations
go to layer six and duplicate it. name this layer 7-1
on original layer 6 -use you magic wand and click inside every other little square starting at top
line , and continuing on to the bottom line.
go to new add a new image ~flood fill this canvas with whatever color you want, I used
color #294344. then copy~add as a new layer~ then go to invert~ selections ~select none.
name this layer 6-2
Go to layer 7-1 and repeat last steps and select each little square you didn't select last time,
Make a new canvas , flood fill will a different color~ copy and paste as a new layer~
invert~ selections~ select none- name this layer 7-2
Select gem 4 layer and go to effects~ plug ins~ dsb flux ~ bright noise
40% mix checked click OK
lets animate
close off layer 7-1 and 7-2
go to edit ~copy special -copy merge~ and take to animation shop and paste as new layer
back to psp
undo bright noise
redo noise 50%
close off 6 and 6-2
and reopen 7-1-7-2
edit ~ copy special~ copy merged~ take to AS and paste after current frame
back to psp
undo bright noise
redo noise 60%
close off 7-1 and 7-2 layer
and reopen 6 and 6-2 layer
edit~ copy special~ copy merged~ take to As and paste after current frame
You should have 3 frames . View Animation if you like what you see you can save as a gif and your done!
Thanks for trying my tutorial , if you have any problems feel free to email me
or use the chat box! Thanks !
Sher
No comments:
Post a Comment