INSERT ALTERNATIVE TEXT FOR YOUR HEADER IMAGE HERE

Thursday, May 28, 2009

Popsicle Anyone Tutorial By Sher

This Tutorial was Written By Me On May 28. 2009
Any similarities is purely coincidental.
You must have A good knowledge of psp and animation shop
to do this tutorial. It is for the advance user .
I'm using the beautiful work of Jose A. Campo.
You must have the proper licenses to use his tubes, they can be purchased Here
The PTU scrap kit I chose to use is made by Crystal , Thanks Sweetie! You can purchase this kit Here
The Template I chose to use is template 16
by Mirella, Thanks Sweetie! You can get her
awesome templates Here
The Mask I chose is wsl 81 by Chelle
Thanks Sweetie! You can get her awesome
masks Here
My Supplies Here

Remember this is just a guide , any kit or tubes of your choosing will
still make a very cute tag.

Ok lets go!
1. Open template in psp, copy and close original.
Delete the copyright and the snowflake layers.
Select bottom layer ~go to image~ resize canvas to 700x700
flood fill this layer white.
2. Select raster 2 layer
Go to selections~select all~ float~defloat~ open paper of choice
I used paper 9 , copy and paste as new layer
selections~ modify~ smooth by 10~ invert~
hit delete on keyboard~select none~ delete the template layer
and rename new layer Circle Layer.
3. Select copy of vector 3 in the layer pallet
Go to selections~select all~float~defloat~open paper of choice ,
copy and paste as new layer
or use the one I supplied, selections~modify~smooth by 10~invert~
hit delete on keyboard~select none~delete the template layer
select none and rename new layer circle layer.

4. Select raster 3 layer in layer pallet
go to selections~select all~float~defloat~open paper of choice
or the one I supplied ~ copy and paste as a new layer~selections~modify~smooth by 10~invert
hit delete on keyboard~ select none~delete template layer
and rename layer
rectangle layer.
5. Select copy of vector 1 in layer pallet
go to selections~select all~float~defloat~open paper of choice ~
I used paper 9 again~
copy and paste as a new layer~
selections~modify~smooth by 1o~invert~
hit delete on keyboard~select none~ delete template layer~
rename new layer rectangle frame.
6. Select Raster 4 in the layer pallet
selections~select all~float ~defloat~ open paper of choice
I use paper 11~ copy and paste as a new layer
selections~modify ~smooth by 10~invert~
hit delete on keyboard~select none
rename new layer strip layer.
go to effects ~texture effects~ binds ~and give it a slight texture of choice.
7. Select Copy of Vector 2 in the layer pallet
selections ~select all~float~defloat~open paper of choice
I used paper 11 again~copy and paste as a new layer
selections~modify~smooth by 10~invert
hit delete on keyboard~select none
rename layer tube frame layer.
Use same effects if you choose, as in # 7
8. Select raster 5 in the layer pallet
selections~select all~float~defloat~ open beach picture
paste as a new layer~ position where desired~ invert
hit delete on keyboard~select none
rename layer beach layer.
delete the template layer.
9. Select frame layer in layer pallet
using magic wand click inside ~ open tube of choice~
copy and paste as a new layer~ resize if desired~
position tube so she is in the center of frame
selections~invert~hit delete on keyboard~
select none. Name this Tube layer.
Add drop shadows of choice to all elements.
10. Close off top 4 layers in pallet
Open vine of choice and paste as a new layer
resize it to 40% and position it so that its on the left end of rectangle layer
branches overhanging. Add a small drop shadow
and duplicate and mirror. merge these two layers together
and rename vine layer.
Then click view all.
11. Click on top tube layer Open butterfly ~
copy and paste as a new layer
position it where desired
resize this 50-50-80-80
add drop shadow~ duplicate~mirror and reposition where desired.
merge these two butterfly's together and name this butterfly layer.
12.Open Summer word art and paste under template (see my tag for placement)
Name this Summer word art layer
13. Open Popsicle's (they are not tubed) using selection tool select one and copy and paste it on one side of Summer word art~ using deform tool rotate it to the left 15 degrees. Repeat with a different color and place on opposite side, rotating it 15 degrees to the right. Merge these layers together naming them popsicle layer.
14. Select bottom layer~ add a new raster layer~ move up to the blank layer~ flood fill with color
of Choice. I chose the one from the blue Popsicle, go to layers
load/save mask~ load mask from disk ~ click on wsl 81 or one of choice,
load mask ~ merge group, rename this mask layer.

Add the summer word art and position it. See My tag
for placement. (do not drop shadow Summer if you plan on animating this.)
And with Font of your choice, and color of choice add
Popsicle Anyone? See my tag for placement.

For the name , I used Impact as a font of choice
In the material pallet I chose a color of Blue from the tag for the forground color
and for background I chose pattern and used my beach picture, After I wrote out my name I gave it a good drop shadow.

If you do not plan on doing the animations you can add
whatever text you want
copyrights , and name, resize to 500x500 and merge all layers
And your done.

If you plan on trying trying this animations here we go, it is a
little time consuming but well worth it!

Select the Summer word art layer, and move it to the top layer in your pallet.
using magic want click on the S so you get the ants going round it
add a new layer now ~ go select your flood fill tool~then select a color from tag~ flood fill and select none.
Click back on summer word art~ using magic wand select the U ~ add a new layer~ go select flood fill tool again and fill with desired color ~ select none. Keep Repeating instructions until you have all the letter filled. Every one must be on a seperate layer.
Add a drop shadow to each letter layer,
You can name each Letter layer if you choose to make it easier.

Here we go now!!
Yipee if you made it here!

1. Close off all your letter layers
Edit ~copy special~copy merge
take to Animation shop and Paste as a new animation.
I usally at this point go to
view and zoom out by 1 making my tag smaller
and cascading it so i can see the frames.
Back to psp
2. Open you S layer
Edit ~Copy special~copy merged
Take to animation shop and paste after current frame.

3.Close off the S layer and open the U layer
Edit~Copy special~ copy merged
Take to animation shop and paste after current frame
Back to Psp
4.Close off U layer and open M layer
Edit ~copy special~Copy Merged
Take to Animation Shop and Paste after current frame.
Back to Psp
5. Close off M layer and open Next M layer
Edit ~copy special ~Copy merged.
Take to animation shop and paste after current frame
Back to psp
6. Close off M layer and open E Layer
Edit ~Copy special~ Copy Merged
Take to animation shop and paste after Current frame
Back to psp
7.. Close off E layer and open R layer
Edit ~ Copy special~ copy merged
Take to animation shop and paste after current frame.
Back to psp
8. Close off all letter layers Again
Edit ~copy special~copy merged
Take to animation shop and paste after current frame
Back to psp
9, Open all layers
Edit ~ copy special~ copy merged
Take to animation shop and paste afer current frame.
10 . Repeat layer 8.
11. Repeat Layer 9
12. Repeat layer 8

At this point you should have 12 frame, you can click view now
In animation shop and
if you like what you have created, go to edit ~ select all~ animations
frame properties ~ select or add 20 ~ ok
You can make it faster or slower its your choice
save as a gif and your done!


I hope you enjoyed doing my tutorial!



Huggies

Sher


No comments:

Post a Comment